On Line UPS

H Series

H Series On-Line UPS is designed with latest technology, making it distinguished by its performance and reliability. The input range is extraordinary wide from 118V to 300V so that the UPS can still run well in areas of poor utility and be robust in various applications. It also eliminates unnecessary battery discharges to prolong the life expectancy of battery. The rectifier stage of H Series implements high frequency, PWM, and power factor correction method. Therefore, the input current is purely sine wave, and power factor can be over 95%.

H Series have very small harmonic current drawn from the utility. That is, it generates no interference to the utility. Beside, the inverter of the unit adopts newest and tough IGBT, high frequency PWM method. So it can response quickly to load change, especially the impressing capability of starting computer load. All power stages are carefully designed to optimal efficiency so as to save the user’s running cost, and minimize heat dissipation. The unit, controlled by the innovative software programs, can self-diagnose all the time and provides various status and data displayed clearly on the panel.

LCD Control Panel

H Series built-in intelligent two-way dialogue interactive dot-matrix LCD control panel provide monitoring as well as management access to the UPS. Detachable design, enable remotely control and status monitoring from remote site to suit user’s convenience. An economical, plain LED display, exactly the same size as LCD panel is selectable. Besides, a mini-LCD remote display is also available.

Tower and Rack Models

Tower and Rack models are both available. Tower model can minimize occupied space. Rack mount model can fit in the equipment rack to make the server room neat and clean. Rack mount model UPS come with the same size battery bank which matches the UPS.

6KVA-20KVA N+ 1 Parallel Redundancy

6KVA-20KVA, specially designed to provide redundant power protection solution, is able to perform parallel up to 3 UPS systems. With the high frequency PWM technology, the UPS attains high input power factor over 95% and avoids significant harmonic interference on the power workshop. The higher efficiency of the inverter enhances the overall efficiency of UPS and reduces the noise of the inverter as well.

Multiple interfaces Cards

With a Multi-interface slot and an additional Multi-interface card, various communications combinations are selectable. Including RS232, SNMP, RS485, AS-400, Modbus, USB, Dry Contact and customized interfaces. All interfaces enable at the same time.

Harga Rp. Call

+6281336167344

+6281336167344

Read more...

Inverter Orion 5000 Va

Spesifikasi

Features:

• High-frequency switching technology for compact size and light weight
• Pure sine wave output for wide range of applications and harsh environment
• Build-in solar charger controller with MPPT technology to optimize the power utilization
• High efficient DC-to-AC conversion minimizing energy loss
• Standby Charging Mode enables battery charging even when the unit is switched off
• Intelligent cooling fan control
• Input/output isolated design for the maximum operation safety
• LCD displays comprehensive operation status
• Configurable AC input voltage range and priority for AC input or PV input
• Supports Home Appliances / Office Equipment/ Lighting Equipment/ Motor-based Equipment (such as Fan, Air-Conditioner, Washing Machines)
• Thorough protections: Input low voltage / Overload / Short circuit / Low battery alarm / Input over voltage / Over temperature
• Supports both rack and wall-mounting set-up for flexible installation

CAPACITY:   4.2KW/5000VA

INPUT

          

Input Voltage Waveform : Pure sine wave (utility or generator)

Nominal Input Voltage :  230Vac

Input voltage range  : 175Vac-280Vac(Normal) ; 125Vac-280Vac(Generator/Wide)

Max AC Input Voltage : 300Vac RMS

Nominal Input Frequency : 50Hz / 60Hz (Auto detection)

OUTPUT       

Wave from  : Pure sine wave (Inverter mode)

Voltage Regulation (Inverter Mode) :  ±10% RMS

Output Frequency : 50Hz / 60Hz ± 1Hz

Nominal Efficiency :     90% (@Inverter mode with normal DC Input; >60% R load);

                                     95% (@Line mode with Rated R load, battery full charged)

Capable of starting electric motor : 2.5HP

Power Factor :   0.84

Over-Load Protection : Tripped off after 5s@≥150% load

Tripped off after   :  10s@110%~150% load

Transfer Time (AC to DC): Normal range : 10ms (typical) 15ms (max)

Generator/wide range:    20ms (typical) 40ms (max)

BATTERY       

Battery Voltage : 48.0Vdc± 1.2Vdc

Battery low alarm voltage : 42.0Vdc± 1.2Vdc

Battery low shut-down voltage : 40.0Vdc ± 1.2Vdc

AC CHARGER

          

Charger Current  : 25A @180V~280V; 20A @125V~180V

Boost charger voltage (bat. Type: 56.8Vdc

Floating charger voltage (bat. Type) : 54.8Vdc

Over charger Voltage : 60.0Vdc

SOLAR CHARGER MODULE

          

Max Charger current : 60A

Charger Power : 2400W

System DC Voltage :  48.0Vdc

Operating Voltage Range  :   60~150Vdc

PV Optimal Work Voltage Range :  90~144Vdc

Max. PV Array Open Circuit Voltage : 150Vdc

MAX. PV Input Current :  30A

AUDIBLE ALARM       

Low Battery at Inverter Mode :  Beeps 1 time every 2s

Overload  : 110%~150%load: beep 10 times every 0.5s;

                  150% load: beep 5 times every 0.5s then fault.

Fault "     Beeps continuously

PHYSICAL     

Dimension(D*W*H)mm  :  428.5mm*350.4mm*119.1mm

Net weight :    10.4kg

Harga Rp. Call

+6281336167344

+6281336167344

Read more...

UPS Orion 3000 Va

Spesifikasi

Features:

• High-frequency switching technology for compact size and light weight
• Pure sine wave output for wide range of applications and harsh environment
• Build-in solar charger controller with MPPT technology to optimize the power utilization
• High efficient DC-to-AC conversion minimizing energy loss
• Standby Charging Mode enables battery charging even when the unit is switched off
• Intelligent cooling fan control
• Input/output isolated design for the maximum operation safety
• LCD displays comprehensive operation status
• Configurable AC input voltage range and priority for AC input or PV input
• Supports Home Appliances / Office Equipment/ Lighting Equipment/ Motor-based Equipment (such as Fan, Air-Conditioner, Washing Machines)

• Thorough protections: Input low voltage / Overload / Short circuit / Low battery alarm / Input over voltage / Over temperature
• Supports both rack and wall-mounting set-up for flexible installation.

INPUT

• Input Voltage Waveform Pure sine wave (utility or generator)
• Nominal Input Voltage 230Vac
• Input voltage range 170Vac-280Vac(Normal)
• 90Vac-280Vac(Generator/Wide)
• Max AC Input Voltage 300Vac RMS
• Nominal Input Frequency 50Hz / 60Hz (Auto detection)

OUTPUT

• Wave from Pure sine wave (Inverter mode)
• Voltage Regulation (Inverter Mode) +/- 10% RMS
• Output Frequency 50Hz / 60Hz +/- 1Hz
• Nominal Efficiency 90% (Inverter mode with normal DC Input >60% R load)
• 95% (Line mode with Rated R load, battery full charged)
• Capable of starting electric motor 1.5HP
• Power Factor 0.8
• Over-Load Protection Tripped off after 5s@ > 150% load
• Tripped off after 10s@110%-150% load Transfer Time
• (AC to DC) Normal range : 10ms (typical) 15ms (max)
• Generator/wide range: 20ms (typical) 40ms (max)
• Power Limitation

BATTERY

• Battery Voltage 24.0Vdc +/- 0.6Vdc
• Battery low alarm voltage 21.0Vdc +/- 0.6Vdc
• Battery low shut-down voltage 20.0Vdc +/- 0.6Vdc

AC CHARGER

• Charger Current 10A @Vi/p<170Vac or Vi/p>280Vac; 20A@Vi/p=230Vac.
• Boost charger voltage (bat. Type) 28.4Vdc
• Floating charger voltage (bat. Type) 27.4Vdc
• Over charger Voltage 30.0Vdc

SOLAR CHARGER MODULE

• Max Charger current 40A
• Charger Power 800W
• System DC Voltage 24.0Vdc
• Operating Voltage Range 30-75Vdc
• PV Optimal Work Voltage Range 45-72Vdc
• Max. PV Array Open Circuit 75Vdc
• Voltage MAX. PV Input Current 20A

AUDIBLE ALARM

• Low Battery at Inverter Mode Beeps 1 time every 2s
• Overload 110%-150%load: beep 10 times every 0.5s.
• >150% load: beep 5times every 0.5s then fault.
• Fault Beeps continuously

PHYSICAL

• Dimension(D*W*H)mm 318mm*268.4mm*85.2mm

Harga Rp. Call

+6281336167344

+6281336167344

Read more...

UPS Home

Harga Rp. Call

+6281336167344

+6281336167344

Read more...

UPS Modular

Green And Energy Saving Product, State Of The Art Design

RM Series Modular UPS System

10KVA to 200KVA Advanced Modular Design and Redundant Power System

RM Series is modular and online double conversion UPS for sensitive equipments. The Power rating covers from 10kVA to 200kVA which delivers the best of reliability, functionality, hot-swappable and flexibility at a competitive price. It is designed specially for data centers, computer systems or critical equipments. As the result of state of the art design, this innovative and reliable power system absolutely commits to satisfy and meet the market requirement.

RM Series modular UPS combines the latest IGBT three-level technology together with DSP control arithmetic. Along with high input power factor, low THD i and high system efficiency, this product achieves very high load adaptability for all kinds of load. The modular design ensures reliable and trouble free operation for the critical loads. Power expansion is very easy to achieve by adding power modules to the system and reach 200kVA power in single frame. It is possible to connect two frames in parallel in order to reach maximum 400kVA.

Modular Construction Design

Each power module is designed to be hot swappable which makes the power expansion and system maintenance easily. Each module controlled independently, thus avoiding single point failure risk. If any module fails or disconnected, the system keeps continuing to operate and supply the power without interruption. It ensures to provide high level of reliability and protection.

Easy Operation And Installation
This product offers flexibility to install that reduces installation time. Consequently, it is very easy to maintain and control that provides the highest reliability and best protection for supplying power. With the large touch screen LCD panel, the user can easily access to the information of the power module and the system.

Intelligent Battery Management

Each UPS module builds in with super charger and the power reaches 3200W. With 10 installed UPS modules, the total charging power rating is up to 32KW. The charger is controlled b DSP with intelligent digital arithmetic thus to prolong the life time the battery.

Intelligent Protection System
All the power modules and the system are protected simultaneously by the hardware and the software. All kinds of protection functions are realized, including current and voltage abnormal, thermal abnormal, short circuit, etc. The reliability of the power module and the system reaches an incredible high level through all of these technologies.

High Reliability Design

Integrated IGBT modules are used in the power module. Comparing to discrete chips, system reliability and manufacturing consistency are much improved. Low-loss integrated three-level IGBT modules help to increase system efficiency. Meanwhile reliability is increased due to lower temperature rising on IGBTs and heatsink. More chips need to be paralleled to realize high current rating if using discrete IGBT chips. Clamped Diodes should be placed around IGBTs which brings risk for voltage/current stress issues and manufacturing process.

Additional Outstanding Features

• High input power factor (>0.99), low input THDi (<3%).
• Strong load adaptability for linear and nonlinear load.
• Intelligent module and system protection design.
• Incredible low noise system design.
• Double DSP controller for individual power module.
• Digital control for the whole parts including rectifier, inverter, charger and discharger.
• IGBT modules rather than discrete components are applied in the power module.
• Digital controlled independent charger, intelligent battery management system.
• Inbuilt switch for cabinet input, output and maintenance connection.
• Large touch screen LCD with plenty of information.
• Independent charger for batteries, intelligent battery management system.
• Digital paralleling technology, very low circle current between modules.
• Totally front access, top and bottom cable connection.
• Each individual modul is configured with independent controller, avoid single point failure risk.
• Friendly generator interface.

Plenty Of Options

• SNMP communication card
• Battery cold start module
• BCB box for battery
• Battery temperature compensation module
• Alarm and message module for mobile phone

Harga Rp. Call

+6281336167344

+6281336167344

Read more...

Memanfaatkan Blower Angin Untuk Pembangkit Listrik tenaga angin

Daya Micro Hydro 500 watt s.d 1000 watt

Read more...

Ica Solar Panel

Spesifikasi

+3% power tolerance
Pmax : 100W
Vmp : 17.1V
Imp : 5.84A
Voc : 21.2V
Isc : 6.46A
Size : 800 x 992 x 35mm
Berat : 9.2Kg

Sertifikasi ISO9001, ISO14001, OHSAS18000
15-tahun 90% nominal power rating
25-tahun 80% nominal power rating

Harga = Rp Call

Harga sewaktu waktu berubah

Untuk daya 200,250,300 Wp Silahkan Hubungi Kami

+6281336167344

+6281336167344

Read more...